Lowrance electronic Lowrance iFINDER Hunt - Manual (Page 47)

39
Navigate trail, navigation page (compass rose) views: Driver is east-
bound heading straight toward trail point 5 (left); bearing arrow
shows the trail point is due east (straight ahead.) Driver has reached
trail point 5 (right) and must turn south to follow the trail. Arrival
alarm goes off and bearing arrow swings around to say turn right
(south), toward the next waypoint, trail point 6. iFINDER now shows
navigation information to point 6, which is 2.07 miles away.
3. When you reach your destination, be sure to cancel your navigation:
press
MENU |
↓ to
C ANCEL N AVIGATION
| ENT . A message will appear asking
if you want to cancel navigation. Select Y
ES
and press ENT .
Clearing or Erasing a Trail
You can erase the current trail and automatically begin recording a
new one by using the Clear Trail command.
WARNING:
Clearing a trail will erase the trail from the iFINDER's memory.
You will not be able to backtrack to that trail if it is erased. If you
need to preserve the trail, switch to Advanced Mode and use the in-
structions in Sec. 4 for Creating and Saving a Trail.
1. Press MENU |
↓ to
C
LEAR
T
RAIL
| ENT . A message appears asking if you
want to Clear all trail points. Select Y ES
and press ENT .
2. Return to the page by pressing EXIT .
Transfer Custom Maps and GPS Data Files
Custom Maps:
Custom maps work only from the MMC card or SD card. When a card
containing a Custom Map File is loaded into the unit, the iFINDER
automatically loads the map into memory when the unit is turned on.
Trail
waypoint
symbol
Compass
rose
Bearing
arrow
Trail line
Present position
Cross track
error range
(off course
indicator)
Track or compass heading indicator