Lowrance electronic Lowrance iFINDER Hunt User Manual
Page 73
65
To preserve a trail from point A to point B, you must turn off the trail
by making it inactive before heading to point C or even back to point A.
When a trail is set to inactive, the iFINDER automatically creates and
begins recording a new trail.
Clear a Trail
This is the command Easy Mode uses to erase an active trail and im-
mediately begin recording a new one. It's only available in Easy Mode.
1. Press
MENU
|
↓ to
C
LEAR
T
RAIL
|
ENT.
A message will appear asking you
if you want to clear all trail points.
Select
Y
ES
and press
ENT
.
Delete a Trail
This is the command Advanced Mode uses to erase or delete a trail:
Press
MENU
|
MENU
|
↓ to
M
Y
T
RAILS
|
ENT
|
↓ to trail name|
ENT|
↓ to
D
ELETE
T
RAIL
|
ENT
.
A message will appear asking if you want to Delete this
trail? Select
Y
ES
and press
ENT
.
Edit a Trail Name
To edit a trail name, press
MENU
|
MENU
|
↓ to
M
Y
T
RAILS
|
ENT
|
↓ to trail
name|
ENT
|
ENT
. Press
↑ or ↓ to change the first character, then press
→ to the next character and repeat until the name is correct. Press
EXIT
repeatedly to return to the previous page display.
Edit a Trail Color
To edit a trail color, press
MENU
|
MENU
|
↓ to
M
Y
T
RAILS
|
ENT
|
↓ to trail
name|
ENT
. Press
↓
C
OLOR
and press
ENT
. Use the
↑ ↓ keys to select the
desired color and press
ENT
. Press
EXIT
repeatedly to return to the main
page display.
Color highlighted on the Edit Trail menu (left); Scrolling through color
options (center); Customizing the trail pattern (right).
Edit a Trail Pattern
To edit a trail name, press
MENU
|
MENU
|
↓ to
M
Y
T
RAILS
|
ENT
|
↓ to trail
name|
ENT
. Press
↓ to
P
ATTERN
and press
ENT
. By default, the pattern