Gps simulator – Lowrance electronic Lowrance iFINDER Hunt User Manual

Page 92

Advertising
background image

84

To switch back to using the iFINDER's internal antenna (or to use an
optional external active antenna), be sure to turn off this command.
From the Satellite Status page, press

MENU

|

to

E

XT

P

ASSIVE

A

NT

. Press

ENT

to uncheck the box.

GPS Simulator

The GPS simulator lets you use the unit as if you were navigating out-
doors. You can set the starting location in latitude/longitude (Starting
Position) or from a stored waypoint, map place or POI location (Select
Starting Waypoint). You can steer your position on the map by using
the arrow keys (

S

TEER W

/ A

RROWS

) or by setting the track and speed in

the boxes provided on simulator screen.

To get to the GPS Simulator:
1. Press

MENU

|

MENU

|

↓ to

GPS S

ETUP

|

ENT

.

2. Press

↓ to

GPS S

IMULATOR

|

ENT

.

GPS Setup Menu (left); GPS Simulator Menu (right).

Choose the desired settings, then turn on the simulator by highlighting
the

S

IMULATOR

O

N

box and pressing the

ENT

key. Press

EXIT

to close this

menu. A message appears periodically, reminding you the simulator is on.
To turn off the simulator, repeat the above steps or turn off the unit.

While in simulator mode, you can press

EXIT

to clear the steering and

speed boxes from the screen while continuing the simulation. This will
allow you to use the map cursor during a simulation. To turn on the
steering and speed boxes again, return to the GPS Simulator menu,
select the

S

TEER WITH

A

RROWS

command, and press

ENT

. Press

EXIT

re-

peatedly to return to the previous page.
Simulating Trail or Route Navigation
In Simulator mode, your unit can automatically follow a trail or route
without manual steering if you use these steps:

Advertising