Life Fitness Peak Pilates Reformer - Manual (Page 26)

Peak PilateSystem Owner’s Guide 23
Chapter 4: Operating the Peak PilateSystem
The following describes how to:
• Fold and unfold the machine
• Adjust the Footbar, Gear Change Bar, Head Rest, and Risers
• Attach the Reformer Springs
• Install the Jump Board and the Long/Short Box
• Convert to the Mat mode
Folding the Peak PilateSystem
The Peak PilateSystem must be in the Reformer configuration (unfolded, no mats) before unfolding.
Caution: Do not attempt to fold or roll the machine on thick pile or heavily padded carpet.
To fold the machine:
1. Make sure that at least the center Reformer Spring is
attached.
2. Place the Gear Bar in position -1 (see "Adjusting the
Gear Change Bar" on page 4-28).
3. Fold the Footbar and the Support Bar (see "Adjusting
the Footbar" on page 4-27).
4. Place the Neoprene Handles or Foot Loops
(whichever is attached to the Rope Assembly) on the
Shoulder Pad Posts.
Support Bar
Footbar