Life Fitness Peak Pilates Reformer - Manual (Page 28)

Peak PilateSystem Owner’s Guide 25
8. When the Head End Rail contacts the Folding
Bumper, grasp the Foot End Rail with your free hand.
Lock the machine in the storage position by turning
the Lock Knob as indicated on the attached label.
Caution: Make sure the Head End Locking Mechanism is engaged before completing the unfolding
procedure.
9. At the Head End of the machine, insert the Lock Strap
through the D-ring. Pull tightly causing the Folding
Stop, attached to the Foot End Crossmember, to butt
up against the leading edge of the Head End Base.
10. Once the Folding Stop butts up against the Head End
Base secure the Velcro. Now the machine can be
rolled away for storage.
Note: If you do not pull the Lock Strap tightly, the
machine will not roll. Do not fold or roll the machine on
thick pile or heavily padded carpet. Do not roll the
machine on an incline.
Unfolding the Peak PilateSystem
To unfold the machine:
1. Roll the machine to the desired location. Do not roll
the machine on an incline or on thick pile or heavily
padded carpet.
Folding
Bumper
Lock Strap
Folding
Stop
D-Ring