Lathem FR700 - Manual (Page 19)

P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
11
Set up an Administrator
After setting up the network communications you will need to set up
at least one administrator. Note: You can have up to 5
administrators.
• Press the MENU key, the Functions Menu will open.
• Press 1, the Set Admin menu will open.
• From the Set Admin menu, press 1 - Admin 1.
• The image collecting screen will display.
• Position the face in the middle of the two cameras with 9 to
25 inches between the face and the terminal.
• The image collecting screen will start the face recognition
enrollment.
• Perform 2 small head circles to the right.
• Perform 2 small head circles to the left.
• Move the face closer to the terminal until the white dashed
square appears.
• Move the face back until there is 9 to 25 inches between the
face and the terminal.
• Turn the head fully to the right.
• Turn the head fully to the left.
• Raise the head up slightly.
• Lower the head down slightly.
• Move the face back from the terminal until there is 9 to 25
inches between the face and the terminal (if adjust position
message is still displaying).
• Resume small head circles to the right (if adjust position
message is still displaying).
• The progress bar at the bottom of the screen will display the
process of the imaging.