Lathem FR700 - Manual (Page 97)

P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
89
Appendix E - PayClock Client
Software WAN Installation
These instructions identify the steps to configure the PayClock Client
software to communicate with the PayClock database server across
the internet.
Important Notes - WAN Installation Requirements
• There must be a VPN tunnel connecting the local and remote
sites.
• The network administrator may be required to configure the
network routers to route the ports used by the PayClock
Client and PayClock database server.
• A static IP address is required on the computer designated as
the PayClock database server.
• PayClock must be licensed as a “Multi-User” system,
additional license fees may apply.
Important Port Information - The following ports are used for this
type of installation.
• 7350 - PC600 Service
• 7351 - PC600 Auto Poll Service
• 2638 - PayClock Database Server
Step #1 - Computer where the PayClock database server will
reside
• Install the PayClock Server (Standard Install).
• Print out the “Server Summary” information. Note: If the
“Server Summary” information was not printed during the
installation follow these steps to access the information:
• Open the PayClock software.
• Click the PayClock orb on the upper left.