Lathem FR700 - Manual (Page 90)

P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
82
press ESC, ESC and ESC again to return to the normal
time/date screen.
Card & Face Verification Method
When enrolling employee faces, take the following into
consideration:
Eye Glasses - It is recommended for the employee to enroll with the
eye glasses on for half the process, then remove the eye glasses and
complete the registration.
Hair Style - If the employee has a hair style that has their hair
covering or blocking their eyes, move the hair away from the eyes
during the registration process.
• When “Please Swipe Card” displays, present the card at the
terminal.
• Position the employee so the face is in the middle of the two
cameras with 9 to 25 inches between the face and the
terminal.
• The image collecting screen will display, start the face
recognition enrollment.
• Perform 2 small head circles to the right.
• Perform 2 small head circles to the left.
• Move the face closer to the terminal until the white dashed
square appears.
• Move the face back until there is 9 to 25 inches between their
face and the terminal.
• Turn the head fully to the right.
• Turn the head fully to the left.
• Raise the head up slightly.
• Lower the head down slightly.
• Move the face back from the terminal until there is 9 to 25
inches between the face and the terminal (if adjust positioning
message is still displaying).