Lathem FR700 - Manual (Page 25)

P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
17
Eye Glasses - It is recommended for the employee to register with
the eye glasses on for half the process, then remove the eye glasses
and complete the registration.
Hair Style - If the employee has a hair style that has their hair
covering or blocking their eyes, move the hair away from the eyes
during the registration process.
Direct Sunlight - It is not recommended to have the terminal
mounted in a location where it is exposed to direct sunlight. This
could be troublesome during the registration process.
Face / Pin and Face Verification Method Selected
• Position the employee so the face is in the middle of the two
cameras with 9 to 25 inches between the face and the
terminal.
• The image collecting screen will display, start the face
recognition enrollment.
• Perform 2 small head circles to the right.
• Perform 2 small head circles to the left.
• Move the face closer to the terminal until the white dashed
square appears.
• Move the face back until there is 9 to 25 inches between their
face and the terminal.
• Turn the head fully to the right.
• Turn the head fully to the left.
• Raise the head up slightly.
• Lower the head down slightly.
• Move the face back from the terminal until there is 9 to 25
inches between the face and the terminal (if adjust positioning
message is still displaying).
• Resume small head circles to the right (if adjust positioning
message is still displaying).