LevelOne NetCon WBR-3408 - Manual (Page 44)

Operation and Status
IP Address The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Connection
Status
This indicates whether or not the connection is currently estab-
lished.
• If the connection does not exist, the Connect button can be
used to establish a connection.
• If the connection currently exists, the Disconnect button
can be used to break the connection.
• Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect automati-
cally, as required" is disabled.
Connection Log
Connection Log
• The Connection Log shows status messages relating to
the existing connection.
• The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it easier to
read new messages.
Refresh Update the data on screen.
41