LevelOne NetCon WBR-3408 - Manual (Page 79)

Wireless Broadband router User Guide
Options
This screen allows advanced users to enter or change a number of settings. For
normal operation, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Figure 41: Options Screen
Data - Options Screen
Backup DNS
DNS IP Ad-
dress Enter the IP Address of the DNS (Domain Name Servers) here.
These DNS will be used only if the primary DNS is unavailable.
TFTP
Enable Firm-
ware
• If enabled, TFTP (Trivial FTP) can be used to upgrade the
firmware in this device. This is normally not required; a Win-
dows utility is available for this purpose.
• You must obtain the firmware upgrade file first; instructions
for using TFTP will be available with the upgrade.
UPnP
Enable UPnP
Services
• UPnP (Universal Plug and Play) allows automatic discovery
and configuration of equipment attached to your LAN. UPnP
is by supported by Windows ME, XP, or later.
• If Enabled, this device will be visible via UPnP.
• If Disabled, this device will not be visible via UPnP.
76