LevelOne NetCon WBR-3408 - Manual (Page 66)

Advanced Features
Figure 36: Virtual Servers Screen
This screen lists a number of pre-defined Servers, and allows you to define your own
Servers. Details of the selected Server are shown in the "Properties" area.
Data - Virtual Servers Screen
Servers
Servers This lists a number of pre-defined Servers, plus any Servers
you have defined. Details of the selected Server are shown in
the "Properties" area.
Properties
Enable Use this to Enable or Disable support for this Server, as
required.
PC (Server) Select the PC for this Server. The PC must be running the
appropriate Server software.
Protocol Select the protocol (TCP or UDP) used by the Server.
Internal (LAN)
Ports Enter the range of port numbers which the Server software is
configured to use.
External
(WAN) Ports. Traffic from the Internet using this range of port numbers will
be sent to the Server. This is normally the same as the
Internal Port Numbers. If it is different, this device will perform
a "mapping" or "translation" function, allowing the server to
use a different port range to the clients.
Buttons
Delete Delete the current Virtual Server entry. Note that the pre-
defined Servers can not be deleted. Only Servers you have
defined yourself can be deleted.
63