LevelOne NetCon WBR-3408 - Manual (Page 5)

Wireless Broadband router User Guide
•
Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the
Wireless Broadband router supports both Dynamic IP Address (IP Address is al-
located on connection) and Fixed IP Address.
Advanced Internet Functions
•
Communication Applications. Support for Internet communication applica-
tions, such as interactive Games, Telephony, and Conferencing applications,
which are often difficult to use when behind a Firewall, is included.
•
Special Internet Applications. Applications which use non-standard connec-
tions or port numbers are normally blocked by the Firewall. The ability to define
and allow such applications is provided, to enable such applications to be used
normally.
•
Virtual Servers. This feature allows Internet users to access Internet servers
on your LAN. The required setup is quick and easy.
•
DDNS Support. DDNS (Dynamic DNS) allows Internet users to connect to
Virtual Servers on your LAN using a domain name, even if your IP address is not
fixed.
•
Multi-DMZ. For each WAN (Internet) IP address allocated to you, one (1) PC on
your local LAN can be configured to allow unrestricted 2-way communication with
Servers or individual users on the Internet. This provides the ability to run pro-
grams which are incompatible with Firewalls.
•
URL Filter. Use the URL Filter to block access to undesirable Web sites by LAN
users.
•
Internet Access Log. See which Internet connections have been made.
•
Access Control. Using the Access Control feature, you can assign LAN users
to different groups, and determine which Internet services are available to each
group.
•
VPN Pass through Support. PCs with VPN (Virtual Private Networking)
software using PPTP, L2TP and IPSec are transparently supported - no configura-
tion is required.
Wireless Features
•
Standards Compliant. The Wireless Broadband router complies with the
IEEE802.11g (DSSS) specifications for Wireless LANs.
•
Supports both 802.11b and 802.11g Wireless Stations. The 802.11g
standard provides for backward compatibility with the 802.11b standard, so both
802.11b and 802.11g Wireless stations can be used simultaneously.
•
Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are
supported.
•
WEP support. Support for WEP (Wired Equivalent Privacy) is included. Key
sizes of 64 Bit and 128 Bit are supported.
•
WPA-PSK support. Support for WPA-PSK is included. WPA-PSK is more
secure than WEP, and should be used if possible.
•
WPA2-PSK support. Support for WPA2-PSK is also included. WPA2-PSK
uses the extremely secure AES encryption method.
•
Wireless MAC Access Control. The Wireless Access Control feature can
check the MAC address (hardware address) of Wireless stations to ensure that
only trusted Wireless Stations can access your LAN.
2