LevelOne NetCon WBR-3408 - Manual (Page 9)

Wireless Broadband router User Guide
Rear Panel
Figure 3: Rear Panel
Antenna 2dBi detachable antenna.
WAN Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a stan-
dard LAN cable.
LAN Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
If required, any port can be connected to another hub. Any
LAN port will automatically function as an "Uplink" port when
necessary.
Reset Button This button has two (2) functions:
• Reboot. When pressed and released, the Wireless
Broadband router will reboot (restart).
• Clear All Data. This button can also be used to clear ALL
data and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the
RED LED has flashed TWICE.
4. Release the Reset Button. The Wireless Broadband router
is now using the factory default values.
Power port Connect the supplied power adapter here.
6