Lennox Hearth CAMBRIA 850 User Manual

Page 3

Advertising
background image

THE FIREPLACE

INTRODUCTION

The Cambria™ wood-burning fireplace is a

mid-efficient, heat radiating fireplace. You will

receive a lifetime of comfort and enjoyment

from your fireplace provided it is installed,

maintained and operated properly.

Please read these instructions and retain

this manual for future reference.

Before beginning the fireplace installation,

consult the local authorities to obtain your

building permit and check your local building

codes. Install the fireplace only as described

in these instructions and using only Lennox

Hearth Products components.

• These appliances are not approved for

Manufactured Home installations.

• When planning a fireplace installation the

following information must be determined

before beginning.

1. Where the fireplace is to be installed.

2. The configuration of the chimney.

3. Optional components installation (fan,

hot air ducting, etc).

4. Electrical wiring.

5. Framing and finish details.

PARTS REqUIRED

Fireplace model: Cambria

10” diameter chimney - Model Secure Temp

ASHT+,

or Nova Temp

HT6103+

insulated stainless

steel chimney or 10” (AC) air-cooled manu-

factured by Security Chimneys International

only, including:

- Chimney lengths

- Elbows (where necessary)

- Associated components as per these

installation instructions

Outside air kit (included)

TABLE OF CONTENTS

Safety Rules ......................................Page 2

Introduction ......................................Page 3

Parts Required .................................Page 3

Optional Equipment ...........................Page 3

Operating The Fireplace ....................Page 3

Fuel ...................................................Page 3

Combustion Control .........................Page 4

Refueling For Best Performance .......Page 5

Smoking – Causes And

Troubleshooting ..........................Page 5

Important Cautions ...........................Page 6

Maintaining Your Fireplace ...............Page 6

Creosote ............................................Page 6

Chimney Maintenance .......................Page 6

Dealing With A Chimney Fire .............Page 6

Disposing of Ashes ...........................Page 6

Door Finish Casing Care ....................Page 6

Refractory Replacement ....................Page 6

Door Installation ...............................Page 6

Door Adjustment ...............................Page 7

Glass Care .........................................Page 8

Gasket Replacement ........................Page 8

Andirons ...........................................Page 8

Fireplace Installation ........................Page 9

Locating The Fireplace ......................Page 9

Framing, Facing And Mantel ..............Page 10

Hearth Extension Requirements .......Page 10

Cold Climate Installations ..................Page 10

Framing Dimensions .........................Page 11

Insulated Chase Construction ...........Page 12

Nailing Flanges ..................................Page 12

Mantel and Facing .............................Page 12

Optional Fireplace Blower ..................Page 13

Hot Air Ducting Installation ..............Page 14

Gravity Kit .........................................Page 14

Outside Air Kit ..................................Page 16

Chimney System ...............................Page 17

Offset Chimney Installation ...............Page 20

Angled Wall Radiation Shield ............Page 22

Chimney Support Installation ............Page 22

Chimney Chase And

Multiple Terminations......................Page 22

Installation Accessories ....................Page 23

Chimney Components Lists ..............Page 23

Replacement Parts ............................Page 25

Specifications ....................................Page 25

Clearances ........................................Page 25

Product Reference Information .........Page 26

CONGRATULATIONS!

When you purchased your new fireplace, you joined the ranks of thousands of individuals

whose answer to their home heating needs reflects their concern for aesthetics, efficiency

and our environment. We extend our continued support to help you achieve the maximum

benefit and enjoyment available from your new fireplace.

Thank you for selecting a Lennox Hearth Products fireplace as the answer to your home

supplemental heating needs.

OPTIONAL EqUIPMENT

5” flexible venting system (central forced

air kit) (see section 3.5.2)

UZY5 blower. The blower installation re-

quires that an electrical connection of a 120v

electrical box located outside the fireplace

be made prior to moving the fireplace in its

final position. (see Optional Fireplace Blower

on Page 13)

Gravity venting system (see Central Forced

Air Kit on Page 15)

OPERATING THE FIREPLACE

Fuel
USE SOLID NATURAL WOOD FUEL ONLY.
The

Cambria fireplace is designed to work best when

fueled with seasoned cordwood. Hardwoods are

preferred to softwoods since the energy content

of wood is relative to its density. Hardwoods will

result in a longer burning fire and less frequent

refuelling. A moisture content of 15% to 20%

(seasoned) is recommended. Wood that has

been cut and split and let to dry under a cover for

a period of one year will usually meet that criteria.

The required drying time will vary depending on

the climate. Wood that is packed tight together

will take longer to dry. Seasoned wood is darker

in color than wet wood and will have visible cracks

in the grain on the ends. Excessively wet wood

will be difficult to burn and will result in lower ef-

ficiency, increased creosoting and deposits on the

glass and in the chimney. Excessively dry wood

will burn well but will also have higher emissions

and shorter burning time.

Do not burn scrap or garbage, treated wood or

wood such as driftwood from the ocean which

has been exposed to salt or other chemicals.

Salt or chemicals can corrode the firebox and

chimney. Do not burn large amounts of paper,

cardboard, Christmas tree branches or building

construction materials. Intense firing with these

materials may overheat the fireplace, causing

damage to the unit, a fire or even possibly ignit-

ing a chimney fire if the chimney is creosoted.

Burning unapproved fuel, resulting in excessive

pollutants being emitted, may be prohibited and

subject to a fine or other penalty by the authority

having jurisdiction in your area.

Processed firelogs can be used. Use only fire-

logs that have been evaluated for the application

of fireplace and refer to firelog warnings and

caution markings on packaging prior to use.

3

Advertising
This manual is related to the following products: