LaCie FireWire 800 - Manual (Page 11)

LaCie d2 Quadra
• D
esign by
n
eil
P
oulton
Introduction
User Manual page 11
Heat Dissipation Design
The LaCie d2 Quadra’s metal body is ideal for naturally dissi-
pating internal drive heat. Its unique design actually draws heat
away from the internal drive toward the external casing. The large
surface area of the heat sink casing absorbs internal heat and
dissipates it, keeping the drive safe and prolonging its life and reli-
ability.
As a consequence, it is normal that the external
casing is warm to the touch. Please make sure that the vent
on the back-bezel is not obstructed and that there is a natural
airflow across the casing.
Upright, Stack & Rackmount Configuration
Heat dissipation is maximized when the d2 Quadra is in the upright
position. When stacking LaCie d2 Quadras, please remember to
attach the included rubber feet on the under side of your drives.
This will allow for some airflow between your drives so that the heat
dissipation can work effectively. LaCie does not recommend stack-
ing or racking more than three d2 drives on top of each other,
especially if these drives are turned on simultaneously.
Exclusive d2 Heat Sink Design
Provides 60% more
area for heat dissipation
Heat Sink
Design
Standard
Design
1.5. Hard Disk Heat Management