Turning the drive on, Lacie d2 quadra, User manual – LaCie FireWire 800 User Manual
LaCie d2 Quadra
To connect the power supply:
The power supply kit is composed of two cables: one cable (
connects to the LaCie drive; and the other cable (
B) connects to
a power outlet, such as a wall outlet or a surge protector.
1. Connect Cable
A to your LaCie hard disk.
2. Connect Cable
B to the power supply brick (C).
3. Connect Cable
B to a surge protector or wall outlet.
4. Turn on the drive by moving the power switch on the back of
the drive to the
on or auto position.
Only use the AC adapter supplied with your spe-
cific LaCie hard disk. Do not use a power supply from another
LaCie hard disk or another manufacturer. Using any other pow-
er cable or power supply may cause damage to the device and
void your warranty.
Always remove the AC adapter before transporting your LaCie
hard disk. Failure to remove the adapter may result in damage
to your drive and will void your warranty.
You may use your LaCie hard disk when
in a foreign country thanks to its 100-240 Volt power supply.
To be able to use this feature, you may need to purchase an
appropriate adapter or cord. LaCie accepts no responsibility
for any damage to the drive resulting from the use of an inap-
propriate adapter. Using an adapter other than one authorized
by LaCie will void your warranty.
2.1. Turning the Drive On