Lexmark 1500 Series - Manual (Page 29)

• The paper guides rest against the edges of the envelopes.
1
2
Notes:
• Do not load envelopes with holes, perforations, cutouts, or deep embossing.
• Do not use envelopes that have exposed flap adhesive.
• Envelopes require more drying time. Remove each envelope as it exits, and allow it to dry to avoid ink
smudging.
Loading labels
You can load up to 25 sheets of labels at a time.
1 Load labels with the print side facing you and the top of the sheet fed into the printer first.
2 Make sure:
• The print side of the labels faces you.
• The top of the labels feeds into the printer first.
• The adhesive on the labels does not extend to within 1 mm of the edge of the labels.
• You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel
off during printing, resulting in a paper jam.
• The labels are loaded in the center of the paper support.
• The paper guides rest against the edges of the labels.
Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink
smudging.
Loading greeting cards, index cards, photo cards, and postcards
You can load up to 25 greeting cards, index cards, photo cards, or postcards at a time.
1 Load cards with the print side facing you.
2 Make sure:
• The cards are loaded in the center of the paper support.
• The paper guides rest against the edges of the cards.
1
2
29