Lexmark 1500 Series - Manual (Page 40)

Resetting the printer to factory default settings
1 Make sure the printer is turned off.
2 Open the access cover and leave it open.
3 Press and hold .
4 While holding , press .
5 When the light blinks, release .
6 Close the access cover.
7 Wait for the light to stop blinking.
The printer is reset to factory default settings.
Printing on both sides of the paper (duplexing)
Understanding the two-sided printing (duplexing) function
The printer has a built-in duplex unit that lets you print on both sides of the paper automatically. This function is also
known as two-sided printing or duplexing.
Note: Automatic two-sided printing (duplexing) works only with plain paper in letter and A4 sizes. If you want to print
two-sided documents on another size or type of paper, use the manual duplexing method.
To print a two-sided copy, the A light must be on. The A button works in tandem with the Duplexing settings in the
printer software. To access the Duplexing settings:
1 With a document open, click File ŒPrint.
2 Click Properties, Preferences, Options, or Setup.
3 Click the Print Layout tab.
The Duplexing area is on the lower portion of the dialog.
The options under the Duplexing drop-down box are “Use Printer Settings,” “On,” “Off,” and “Manual.”
Select To
Use Printer Settings Control two-sided printing using the A button. Press A to turn the A light on or off.
• When the A light is on, your documents are printed on both sides of the paper
(duplexed).
• When the A light is off, your documents are not printed on both sides of the paper.
Note: Use Printer Settings is the factory default setting.
On Turn on the A button so that all documents are printed on both sides of the paper.
Note: The A light stays on until you select a different option.
Off Turn off the A button so that all documents are printed on one side of the paper.
Note: The A light stays off until you select a different option.
40