LevelOne GSW-2600TXM - Manual (Page 111)

111
Parameter Default Description
Management
Mode
Console
Mode Indicates that the port settings are for direct console
connection.
Baud Rate 19200 The rate at which data is sent between devices.
Options: 9600, 19200 and 38400 baud.
Data Bits 8 bits Sets the data bits of the RS-232 port.
Options: 7, 8
Stop Bits 1 bit Sets the stop bits of the RS-232 port.
Options: 1, 2
Parity none Sets the parity of the RS-232 port.
Options: none / odd / even
Timeout 0 minutes If no input is received from the attached device after this
interval, the current session is automatically closed.
Range: 0 - 100 minutes; where 0 indicates disabled
Auto Refresh 10 seconds Sets the interval before a console session will auto refresh
the console information, such as Spanning Tree
Information, Port Configuration, Port Statistics, and RMON
Statistics.
Range: 0-255 seconds; where 0 indicates disabled
3.3.Main Menu
Using the onboard Web agent, you can define system parameters, manage and control
the switch, and all its ports, or monitor network conditions. The interface screen includes
the main menu on the left side, the menu bar beneath the image of the switch, and a list
of commands beneath the menu bar. The following table briefly describes the selections
available from this program.
Menu Description
System Information Menu
System Information Provides basic system description, including contact information.