LevelOne GSW-2600TXM - Manual (Page 122)

122
Parameter Default Description
Link Status Indicates if the port has a valid connection to an external
device.
Admin
Status Enabled Allows you to disable a port due to abnormal behavior
(e.g., excessive collisions), and then enable it after the
problem has been resolved. You may also disable a port
for security reasons.
Auto
Negotiate* Enabled Enables or disables auto-negotiation for the following
features
Port Type Speed Duplex Mode Flow
Control
10/100BASE-T auto auto auto
100BASE-FX 100M full duplex auto
1000BASE-SX/LX 1000M full duplex auto
1000BASE-T 1000M full duplex auto
The 10/100BASE-TX ports can autonegotiate the speed
to 10/100 Mbps, and the transmission mode to half / full
duplex. The 100BASE-FX, 1000BASE-SX/LX, and
1000BASE-T modules are all fixed at the indicated speed
and duplex mode. All media types can auto-negotiate
flow control.
Default Type 10M-Half-Duplex If auto-negotiation is disabled, the port will be set to the
indicated speed and duplex mode.
Current
Type Indicates the current speed and duplex mode.