LevelOne GSW-2600TXM - Manual (Page 22)

22
Network Configuration: HTTP Configuration
=====================
HTTP Server : ENABLED
<Apply> <OK> <Cancel>
Administrative status of the HTTP server. | READ/SELECT
Use <TAB> or arrow keys to move, <Space> to scroll options.
Note:
Port 80 is used for HTTP service.
2.4.2.Configuring the Serial Port
You can access the onboard configuration program by attaching a VT100 compatible
device to the switch’s serial port. (For more information on connecting to this port, see
“Required Connections” on chapter 1.) The communication parameters for this port can
be accessed from the Serial Port Configuration screen shown below and described in
the following table.
Serial Port Configuration
=========================
Management Mode : CONSOLE MODE
Baud rate : 19200
Data bits : 8
Stop bits : 1
Parity : NONE
Time-Out (in minutes) : 0
Auto Refresh (in seconds) : 10
<Apply> <OK> <Cancel>
The connection mode of the serial port. |
READ/SELECT
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter Default Description
Management
Mode
Console
Mode Indicates that the port settings are for direct console
connection.