LevelOne GSW-2600TXM - Manual (Page 59)

59
IP interface”).
Setting the ARP Timeout
You can use the following configuration screen to modify the aging time for dynamically
learned entries in the ARP cache.
ARP Configuration
=================
ARP Timeout (Minutes) : 20
<Apply> <OK> <Cancel>
ARP timeout value (minutes). |
READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Default Description
ARP
Timeout
20
minutes The time that dynamically learned entries are retained in the
ARP cache.
Range: 0-999 minutes, where 0 disables aging
Setting the RIP Advertisement Policy
You can use the following configuration screen to set the timing interval and policies RIP
uses to advertise route information.
RIP Configuration
=================
RIP Update Time (Seconds) : 30
Default Route Advertisement : DISABLED
Static Route Advertisement : DISABLED
Ignore Host Route : DISABLED
<Apply> <OK> <Cancel>
RIP timeout value (seconds).
| READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Default Description