Liebert Nfinity 208 V / 240 V 60Hz - Manual (Page 28)

26
Change Configuration Settings
Change Settings Menu
Starting from the Main Menu, locate and press
UPS Configuration. From the UPS Configuration
screen, select the Change Settings option. Here
one may configure
Nfinity from a large variety of
selections. Items indicated by an asterisk (*) or
underlined are the selected settings.
Input Voltage: Select the required input voltage
setting. This voltage must match the bypass
voltage jumper setting.
Set Password: Set a Password to prevent
unauthorized users from changing the
configuration of the
Nfinity. It can be up to 7
characters in length. Once set, the password
will be required to change the configuration.
Auto Battery Test: Configure when and how
often the
Nfinity’s automatic battery test will run.
This test is designed to ensure Battery system
integrity and warn of early problems.
Low Battery Warning: Notifies user as to how
much runtime is available. Can be set from 1 to
30 minutes.
>
Main Menu
UPS Configuration
Change Settings
>
Input Voltage
208/120 LLNG
208/120 LLNG *