Liebert Nfinity 208 V / 240 V 60Hz - Manual (Page 29)

27
Auto Restart: Automatically restarts once both
delay parameters (battery capacity percentage
and countdown timer) are met.
User Settings: From here one can enter the
UPS ID or adjust the contrast of the user
interface LCD.
Set Date/Time: Allows user to enable DST
(Daylight Savings Time), change the Day, Date
and Time setting on
Nfinity. When enabled, the
time will automatically adjust to Daylight
Savings.
Max Load Alarm Set: Allows an alarm to set
when
Nfinity’s load reaches a specific level.
UPS Shutdown Delay: Delays UPS shutdown
for specified amount of time after receiving
shutdown command via communications (serial
or SNMP).