Lenovo THINKSERVER 392 - Manual (Page 70)

Menu item Submenu item Selections Comments
Intel EIST Technology • Disabled
• Enabled
Enable or disable the Intel
EIST Technology.
P-State Coordination • HW_ALL
• SW_ALL
• SW_ANY
Change the P-State
Coordination type.
Intel Turbo Boost
Technology • Disabled
• Enabled
Enable or disable the Intel
Turbo Boost Technology.
C1E Support • Disabled
• Enabled
Enable or disable the C1E
Support.
CPU C3 Report • Disabled
• ACPI C2
• ACPI C3
Enable or disable the CPU
C3 report.
CPU C6 Report • Disabled
• Enabled
Enable or disable the CPU
C6 report.
Package C State Limit • C0
• C1
• C6
• C7
• No Limit
Set the Package C state
limit.
Hardware Prefetcher • Disabled
• Enabled
Enable or disable the
hardware prefetcher
function.
Adjacent Cache Line
Prefetch • Disabled
• Enabled
Enable or disable the
adjacent cache line
prefetcher function.
Memory Configuration
(set memory configuration
parameters and view
information about the
installed memory modules) Memory Reset • No
• Yes
Set the memory module
reset options. If a memory
module encounters any
errors, set this option to
Yes to try to re-initialize the
memory module.
Intel VT-d Technology • Disabled
• Enabled
Enable or disable the Intel
VT-d technology.
Intel TXT Technology • Disabled
• Enabled
Enable or disable the
Intel Trusted Execution
Technology (TXT).
Serial Port 1 • Disabled
• Enabled
Enable or disable the serial
port 1 (COM 1).
Serial Port 2 • Disabled
• Enabled
Enable or disable the serial
port 2 (COM 2).
Power on by RTC Alarm • Disabled
• Enabled
Enable or disable powering
on by RTC alarm.
Chipset Configuration
(set chipset configuration
parameters)
Restore on AC Power Loss • Stay off
• Last State
Select the system resume
status after ac power loss.
58 ThinkServer Hardware Maintenance Manual