Lexmark 280 User Manual

Page 123

Advertising
background image

Menu item

Description

Alarms

Alarm Control
Cartridge Alarm

Sets an alarm to sound when the printer requires operator

intervention
Available selections for each alarm type are:

Off
Single
Continuous

Notes:

Single is the factory default setting for Alarm Control. Single

sounds three quick beeps.

Off is the factory default setting for Cartridge Alarm. Off

means no alarm will sound.

Continuous repeats three beeps every 10 seconds.

Timeouts

Job Hold Timeout

5–255

Sets the amount of time the printer waits for user intervention

before it holds jobs that require unavailable resources and

continues to print other jobs in the print queue
Notes:

30 seconds is the factory default setting.

This menu item appears only when a hard disk is installed.

Timeouts

Power Saver

1–240

Sets the amount of time the printer waits after a job is printed

before it goes into a reduced power state
Notes:

30 minutes is the factory default setting.

Lower settings conserve more energy, but may require longer

warm-up times.

Select the lowest setting if the printer shares an electrical

circuit with room lighting or you notice lights flickering in the

room.

Select a high setting if the printer is in constant use. Under

most circumstances, this keeps the printer ready to print with

minimum warm-up time.

Timeouts

Screen Timeout

15–300

Sets the amount of time in seconds the printer waits before

returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.

Timeouts

Print Timeout

Disabled
1–255

Sets the amount of time in seconds the printer waits to receive an

end-of-job message before canceling the remainder of the print

job
Notes:

90 seconds is the factory default setting.

When the timer expires, any partially printed page still in the

printer is printed, and then the printer checks to see if any

new print jobs are waiting.

Print Timeout is available only when using PCL emulation.

This setting has no effect on PostScript emulation print jobs.

Understanding printer menus

123

Advertising
This manual is related to the following products: