Lexmark 280 User Manual

Page 41

Advertising
background image

7

Temporarily connect a USB cable between the computer on the wireless network and the printer.

Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so

you can print wirelessly.

8

Follow the on-screen instructions to complete the software installation.

Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your
installation.

9

To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step

8 for each computer.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1

Locate the printer MAC address on the sheet that shipped with the printer. Write the last six digits of the MAC

address in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___

2

Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the power

on.

Enter the printer information

1

Access the AirPort options.

Additional printer setup

41

Advertising
This manual is related to the following products: