Adjusting the brightness of the display – Lexmark 280 User Manual

Page 53

Advertising
background image

3

Click Timeouts.

4

In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters

Power Saver mode.

5

Click Submit.

Using the printer control panel

1

Make sure the printer is on and Ready appears.

2

Press .

3

Press the arrow buttons until Settings appears, and then press .

4

Press the arrow buttons until General Settings appears, and then press .

5

Press the arrow buttons until Timeouts appears, and then press .

6

Press the arrow buttons until Power Saver appears, and then press .

7

Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver
mode, and then press .

Adjusting the brightness of the display

To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display.
Available settings range from 1–10. The factory default setting is 5.

Using the Embedded Web Server

1

Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address

in the TCP/IP section.

2

Click Settings, and then click Utilities Menu.

3

In the LCD Brightness box, type in the brightness you want for your display.

4

Click Submit.

Using the printer control panel

1

Make sure the printer is on and Ready appears.

2

Press .

3

Press the arrow buttons until Settings appears, and then press .

4

Press the arrow buttons until Utilities Menu appears, and then press .

5

Press the arrow buttons until LCD Brightness appears, and then press .

6

Press the arrow buttons to select a setting, and then press .

Minimizing your printer's environmental impact

53

Advertising
This manual is related to the following products: