Status > router, Status > local network, Status > router status > local network – Linksys E1000 User Manual

Page 38: Router information, Internet connection, Local network, Dhcp server

Advertising
background image

35

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Firmware Upgrade

Before upgrading the firmware, download the
Router’s firmware upgrade file from the website,
www.linksys.com/support .

Please select a file to upgrade the firmware

Click

Browse and select the firmware upgrade file .

Start to Upgrade

After you have selected the appropriate

file, click this button, and follow the on-screen instructions .

WARNING:

Do not interrupt the upgrade

process . You should not turn off the power or
press the Reset button during the upgrade
process . Doing so may disable the Router .

Status > Router

The Router screen displays information about the Router
and its current settings .

Status > Router

Router Information

Firmware Version

The version number of the Router’s

current firmware is displayed .

Firmware Verification

The unique identifier of the

firmware is displayed .

Current Time

The time set on the Router is displayed .

Internet MAC Address

The Router’s MAC address, as

seen by your ISP, is displayed .

Host Name

The Host Name of the Router is displayed (if it

was entered on the Setup > Basic Setup screen) .

Domain Name

The Domain Name of the Router is

displayed (if it was entered on the  Setup  >  Basic  Setup
screen) .

Internet Connection

This section shows the current network information
stored in the Router . The information varies depending on
the Internet connection type selected on the Setup > Basic 
Setup
screen .

For a DHCP connection, select Release IP Address or
Renew IP Address as appropriate to release or renew
a DHCP lease . For a PPPoE or similar connection, select
Connect or Disconnect as appropriate to connect to or
disconnect from the Internet .

Click Refresh to update the on-screen information .

Status > Local Network

The Local Network screen displays information about the
local network .

Status > Local Network

Local Network

Local MAC Address

The MAC address of the Router’s

local, wired interface is displayed .

Router IP Address

The Router’s IP address, as it appears

on your local network, is displayed .

Subnet Mask

The Subnet Mask of the Router is displayed .

DHCP Server

DHCP Server

The status of the Router’s DHCP server

function is displayed .

Start IP Address

For the range of IP addresses that can

be used by devices on your local network, the starting IP
address is displayed .

End IP Address

For the range of IP addresses that can

be used by devices on your local network, the ending IP
address is displayed .

Advertising