LG STB1000 - Manual (Page 13)

13 206-4147
Installer Remote Control Typical Key Functions
1 2 3
4 5 6
7 8 9
0
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
PIP CH- PIP CH+ PIP SWAP PIP INPUT
PIP SAP
FLASHBK
REMOVE
ALPHA/NUM
P
A
G
E
MUTE
TIMER
MENU RETURN
VOL CH
POWER
GUIDE
INPUT
CC
ENTER
TV DVD
VCR STB
&@
.:/,
RATIO
PORTAL INFO i
NUMBER Buttons (0 – 9) & DASH
Use to enter a program number or channel.
Dash is used for sub-channel numbers such
as 2-1, 2-2, 9-1, 9-2, 100-3, 100-4, etc.
FLASHBK (FLASHBACK)
Returns to the previously tuned channel.
PIP
Toggles through Picture-In-Picture options.
RATIO
Adjusts the picture aspect ratio.
TIMER
Sets the amount of time before the STB
automatically turns itself OFF.
SAP
Analog Mode: Selects MTS sound (Mono,
Stereo, or SAP). DTV Mode: Changes audio
language, if additional languages are avail-
able.
*
The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only.
This Installer Remote may vary from the Installer Remote supplied with the STB1000.
Color buttons access special functions in
some menus.
VCR/DVD BUTTONS
Controls some video cassette recorders
or DVD players.
VOLUME UP/DOWN
Increases/decreases sound level.
CC
Press to activate subtitles.
MUTE
Switches sound ON or OFF.
CHANNEL/PAGE UP/DOWN
Changes the channel. Moves from one full
set of screen information to the next.
Arrows (Up/Down/Left/Right) & ENTER
Use to navigate on-screen menus and adjust
STB settings to your requirements.
RETURN
Returns one level to the previous menu/
display.
MENU
Displays STB setup menus on the screen.
Also exits the on-screen menu system.
INPUT
Selects RGB, HDMI/DVI1, HDMI2,
Component Input, AV1, and AV2 sources.
GUIDE
Displays and removes the electronic
program guide.
PORTAL
Displays and removes the interactive menu.
INFO
Displays channel information.
PIP CH +/-
Changes the PIP channel.
PIP SWAP
Exchanges the main/sub images.
PIP INPUT
Selects the connected input source for the
sub-picture.
TV/STB/DVD/VCR
Select the remote’s operating mode: TV,
STB, DVD, or VCR.
POWER
Turns STB or any other programmed equip-
ment On or Off, depending on mode.
SAP notes:
• If SAP is selected and no SAP is provided, sound
may not be heard on channel.
• Each analog channel may have its own SAP setting.
• Digital channels will reset to default audio language
with a power off/on.
*