Before operation (continued) audio, Dolby digital, Mpeg – LG DR4912 User Manual

Page 24: Sampling frequency, Drc (dynamic range control), Vocal

Advertising
background image

24

Before Operation (Continued)

Audio

Each DVD disc has a variety of audio output options.
Set the recorder’s Audio Output according to the type of
audio system you use.

Dolby Digital

PCM: Select when connected to a 2-channel digital stereo
amplifier. The DVD Recorder’s digital audio outputs sounds
in the PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital recording system.
Bitstream: Select “Bitstream” if you connected the DVD
Recorder’s DIGITAL OUT jack to a Dolby Digital
decoder (or an amplifier or other equipment with a
Dolby Digital decoder).

DTS

OFF: If you select “OFF”, the DTS signal is not output
through the DIGITAL OUT jack.
Bitstream: Select “Bitstream” if you connected the DVD
Recorder’s DIGITAL OUT jack to a DTS decoder (or an
amplifier or other equipment with a DTS decoder).

MPEG

PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD Recorder’s digital audio out-
puts sounds in the PCM 2ch format when you play a
DVD video disc recorded on the MPEG2 recording
system.
Bitstream: Select “Bitstream” if you connected the DVD
Recorder’s DIGITAL OUT jack to a MPEG decoder (or
an amplifier or other equipment with a MPEG decoder).

Sampling Frequency

If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to ON for this effect.

Vocal

Set Vocal to ON only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

Vocal

Bitstream

PCM

Setup

Language

Audio

Lock

Recording

Disc

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

Vocal

Bitstream

OFF

48KHz

96KHz

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

Vocal

OFF

ON

Setup

Language

Audio

Lock

Recording

Disc

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

Vocal

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

Vocal

OFF

ON

Bitstream

PCM

Dolby Digital

DTS

MPEG

Sampling Freq.

DRC

Vocal

Advertising