Philips DTR1000 User Manual
Page 21
DAY TO DAY OPERATION 19
English
7.12 Using the TV / STB button
This button is used to switch between watching digital
channels via your digital receiver and standard analogue
channels on your TV.
You are watching digital TV or listening to digital radio:
- Press the TV/STB button to switch to analogue TV
Press again to revert to digital TV.
7.13 Watching locked channels
If you have selected a locked channel, you must unlock
the channel to watch it.
- You are prompted by a lock icon and a field in the
banner to enter a 4 digit PIN code (default 0000).
- Enter you PIN code to unlock and watch the selected
channel.
7.14 How do I reset my receiver if it
"Freezes"?
In the unlikely event that your receiver "Freezes" (i.e. you
can no longer control it with the remote control), simply
proceed with the steps described below:
Press the "LOW POWER" button, on the receiver front
panel for at least 5 seconds. After releasing the button
wait for a stable front display indication (i.e. the left LED
is either orange for standby mode or green for TV mode).
You can now continue with normal operation.