Philips DTR1000 - Manual (Page 25)

CHANGE THE SETTINGS 23
English
8.2.2.1 For "TV channels" item, the full TV channel
list, which has been found after the scanning
process, is shown.
• You can scroll down or up with the 9 or 8 button to
select a channel.
• You can press the OK button to enable or disable the
channel.
IMPORTANT: All non-tagged channels are disabled and
consequently not visible in all channel lists.
8.2.2.2 For "RADIO channels" item, the full RADIO
channels list, which has been found after
scanning process, is shown.
• You can scroll down or up with the 9 or 8 button to
select a channel
• You can press the OK button to enable or disable the
channel
IMPORTANT: All non-tagged channels are disabled and
consequently not visible in all channel lists.
8.2.2.3 For "Update mode" item, you can enable or
disable automatic update of channels.
• You can scroll down or up with the 9 or 8 button to
choose the wanted sub option
• You can press the OK button to store your choice
8.2.2.4 For "New channels" item, you can enable or
disable installation of scrambled channel.
• You can scroll down or up with the 9 or 8 button to
choose the wanted sub option
• You can press the OK button to store your choice
8.2.2.5 For "Update now" item.
• Press the OK button to start the new update of channels
8.2.3 Check signal quality / Check your aerial
From "Installation" menu, you selected "Antenna
Positioning" and pressed * button.
This menu is used to help positioning your antenna and
checking the availability of signals on a specific RF
channel.
Positioning your antenna:
- Two bar graphs help you pointing your antenna by
indicating the signal strength and the signal quality.
- When signal quality is medium or good, the available
channels present on this channel are indicated.