Philips DTR1000 - Manual (Page 24)

22 CHANGE THE SETTINGS
English
8.2.1.2 For "TV format" item, you set-up the format
of the video output in one of the following
ways:
- 16/9
- 4/3 - Letterbox
- 4/3 - Pan & Scan
8.2.1.3 For "TV sound" item, you set-up the
standard of the TV sound output in one of
the following ways:
- Mono
- Stereo
8.2.1.4 For the "Default volume" item, you set-up
the volume of TV sound output.
Use the 9 or 8 button to choose desired default
volume setting.
8.2.1.5 For "VCR sound" item, you set-up the
standard of the VCR sound output in one of
the following ways:
- Mono
- Stereo
8.2.1.6 For "VCR control" item, you set-up the
control of your VCR recording in one of the
following ways:
- Off
- Easy recording so called "Prepare Record"
- Record Link
For more details consult chapter 10.4.
Note: this setting is also applicable for Philips DVD recorders or
other brand equipment which supports one of the two control
system.
8.2.2 Channel installation
From "Installation" menu, you selected "Channels" and
pressed * button.
A new menu is drawn to control the features below:
- Installation of the TV channels.
- Installation of the RADIO channels.
- Enable or disable automatic update of channels.
- Enable or disable installation of scrambled channels.
- Start searching for new channels.
The selection is now on "TV channels":
- You can scroll down or up with the 9 or 8 button to
choose the required option.
- For each option, you can press on * button to access
its setting sub options.