Panasonic WU-RM205E - Manual (Page 23)

CONCEPT
SYSTEM
EXAMPLES
CONNECTIONS
PR
ODUCTS
BLOCK
D
IA
GRAMS
44 45
4
PRODUCTS
WA-MA120N/WA-MA240N
4
PRODUCTS
WA-MA120N/WA-MA240N
CONCEPT
SYSTEM
EXAMPLES
CONNECTIONS
PR
ODUCTS
BLOCK
D
IA
GRAMS
Mixing Power Amplifier
WA-MA120N
(120 W)
Mixing Power Amplifier
WA-MA240N
(240 W)
PREFACE
The WA-MA120N/240N is a Mixing Power Amplifier that
features multi-input, announcement priority control, call tone,
and other features.
You can select either a 120 W model (WA-MA120N) or 240
W model (WA-MA240N) to suit the structure of your system.
Features such as 2-channel announcement, Remote
Microphone announcement, zone expansion capabilities, all-zone announcement between different work areas, and
other features provide outstanding system flexibility that
meets the needs of a wide range of applications, including
retail outlets, businesses, office buildings, factories, schools,
and more.
The term "Amplifier" in this manual refers to the Panasonic
WA-MA120N/240N Mixing Power Amplifier.
FEATURES
• Can be configured as a 1-channel or 2-channel
broadcast announcement system.
• Supports connection of up to four Remote
Microphones (WR-210AE). Individual zone, group, all-
zone, and 2-channel broadcast announcements are all
supported from Remote Microphones.
• Expansion to up to 30 zones is supported by
combining up to 10 Amplifier units.
• When multiple Amplifier units are used in combination,
all-zone announcement is supported even if each area
has a different system configuration.
• Other Functions
• Multiple inputs for two line inputs, three microphone/line
inputs, one Remote Microphone input, one telephone
paging input, and one EMG input. Supports connection to
business and emergency announcement equipment at a
single location.
• Announcement priority control with four 1-channel
announcement priority levels (fixed). In case of an
emergency call or emergency announcement, lower
priority announcements are blocked automatically in
accordance with the priority levels.
• Easy switching of high impedance loudspeaker output
voltage between 100 V and 70 V for plenty of flexibility to
adapt to the needs of each system.
• Equipped with REC OUT, LINE OUT, INS IN/THRU/
OUT. The Amplifier can be expanded while connecting
equipment to enable announcements required for
operation of a particular business.
• External attenuators can be bypassed during all-zone
announcement. This allows emergency announcements,
even when an attenuator is being used in a local area.
• Operation on/off control can be use for remote switching
between operation and non-operation modes.
• Connecting a battery (24 V) allows continued operation in
case of a power outage.
2-channel Broadcast Announcement
• This Amplifier supports 2-channel broadcast announcement from INPUT 1 or a Remote Microphone.
• The illustration below shows the concept behind 2-channel broadcast announcement. This function can be used to announce
to zone 1 only, without interrupting the BGM being played in zones 2 and 3. Note, however, that zone1 2-channel broadcast
announcement is cancelled during all-zone announcement. Because of this, it coincides with the 1-channel announcement and
the output audio signal priority for zone 1 is shown in the table below.
BGM
BGM
BGM
BGM
BGM
BGM
BGM
BGM
Zone 1 speaker
Zone 2 speaker
Zone 3 speaker
Zone 1 speaker
Zone 2 speaker
Zone 3 speaker
Zone 1 speaker
Zone 2 speaker
Zone 3 speaker
Zone 1 speaker
Zone 2 speaker
Zone 3 speaker
Zone 1 speaker
Zone 2 speaker
Zone 3 speaker
Remote Microphone
announcement
(BGM cut)
(BGM cut)
2-channel
announcement
Announcement by
Remote Microphone
to zone 1 only...
2-channel broadcast
announcement to
zone 1 only...
1-channel announcement
2-channel broadcast
announcement
1-channel
2-channel
1-channel
2-channel
BGM player
Amplifier
Call microphone
Line input
[LINE 1, 2]
INPUT 1
input terminal
[INPUT 1]
Remote
Microphone
input
[RM]
Mixing
Mixing
Built-in
power amplifier
External
power amplifier
INPUT
D-OUT jack
[INPUT D-OUT]
CALL relay
ZONE 1
CALL IN terminals
[ZONE 1 CALL IN]
Zone relay
Zone 1
output
terminal
[ZONE 1]
Zone 2
output
terminal
[ZONE 2]
Zone 3
output
terminal
[ZONE 3]
Remote
Microphone
• When INPUT 1 and a Remote Microphone are both used for 2-channel broadcast announcement, the input is mixed.
Level Zone 1 output audio signal source
1 All-zone announcement from emergency announcement equipment
2 All-zone announcement from telephone paging
All-zone announcement from INPUT 1 (during 1-channel announcement)
3 All-zone announcement from Remote Microphone
4 2-channel broadcast announcement from Remote Microphone
2-channel broadcast announcement from INPUT 1
5 Individual zone announcement from Remote Microphone
6 INPUT 2, 3, LINE 1,2