Panasonic UF-560 - Manual (Page 38)

34
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be
temporarily changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
by the procedure described below.
Setting the Fax Parameters
FUNCTION
7
4 SET
Enter Fax Parameter number from the Parameter Table
(see pages 35 to 38).
Ex: 0 1 for CONTRAST
SET
Enter the new setting value.
Ex: 2 for LIGHTER
SET
To set another parameter, press CLEAR to return to step
3, or, to return to standby, press STOP .
1. To scroll the Fax Parameters in Step 2 or 4, press or .
2. To print out a Fax Parameter List, see page 151.
3. The built-in battery when fully charged can back up the Fax Parameter settings for up to 10 days
when a power failure occurs .
03002000001
03002030002
03002020001
02007060008
#@multitude
03002060001
#@multitude
03002060009
03002060006
03002060007
03002060005
Note: 03002070001
03002070002
03002070003
SET MODE (1–6)
ENTER NO. OR
Ɵƞ
FAX PARAMETER(01–99)
NO.=
FAX PARAMETER(01–99)
NO.=01
01 CONTRAST
1:NORMAL
01 CONTRAST
2:LIGHTER
02 RESOLUTION
1:STANDARD
1
2
3
4
5
6