Panasonic UF-560 - Manual (Page 45)

41
Basic Transmission Settings
You can temporarily change the transmission settings either before or after you place the document on the ADF.
These settings are as follows;
•
Contrast
•
Resolution
•
Halftone
•
Stamp
•
Communication Journal
After your document has been sent, your machine will automatically return to the preset settings.
Contrast
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press CONTRAST to:
CONTRAST = Normal CONTRAST =Lighter CONTRAST = Darker
DARKER
LIGHTER
CONTRAST
DARKER
LIGHTER
CONTRAST
DARKER
LIGHTER
CONTRAST
To change the preset Contrast position, change the setting of Fax Parameter No. 01, see page 35.
Resolution
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press RESOLUTION to:
RESOLUTION = Standard
S–FINE
FINE
RESOLUTION
S–FINE
FINE
RESOLUTION
S–FINE
FINE
RESOLUTION
RESOLUTION = Fine RESOLUTION = Super Fine
To change the preset Resolution position, change the setting of Fax Parameter No. 02, see page 35.
04002000001
04002030004
04002020006
04002050006
Note: 04002070001
04002020002
04002050002
Note: 04002070002
4