Panasonic UF-560 - Manual (Page 91)

87
Receive To Memory
Printing Out Documents
After receiving a document with Receive To Memory feature, the following message will appear on the display.
To print the document, follow these steps below.
FUNCTION
8
5 SET
3
SET
Enter the password to print the documents.
(see Note 1)
Ex: 1 2 3 4
SET
Machine will start to print the documents.
1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing SET in step 4.
2. Once you set RCV TO MEMORY feature to On, the password cannot be changed (Fax Parameter No.
37 will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY
feature to Off first. Then change the password (see page 86).
05007000002
05007020003
05007050001
05007990001
04002060009
#@multitude
05007060003
05007060006
05007060007
05007060008
05007060009
Note:
05007070003
05007070004
MESSAGE IN MEMORY
< RCV TO MEMORY >
SELECT MODE (1–5)
ENTER NO. OR
Ɵƞ
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
INPUT PASSWORD
INPUT PASSWORD
1234
* PRINTING *
MEMORY RCV’D DOC
5
1
2
3
4
5
6