Panasonic UF-560 - Manual (Page 40)

36
Customizing Your Machine
No. Parameter
Setting
Number
Setting Comments
17 RECEIVE MODE 1 Manual Setting the reception mode either automatic or manual.
2 Auto
22 SUBSTITUTE RCV 1 Invalid Selecting whether or not the machine receives to memory when
recording paper runs out, toner runs out or recording paper
2 Valid
recording a er runs out, toner runs out or recording a er
jammed.
23 RECORDING PAPER
SIZE
1 A4 Setting the recording paper size installed in your machine.
(UF-550/560 only)
SIZE
2 Letter
(UF-550/560 only)
3 Legal
24 PRINT REDUCTION
1 Fixed
Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No 25
2 Auto
Parameter No. 25.
Auto: Reduce received document according to the length of
received documents.
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is selected
ĆĆĆ ĆĆĆ
arameter functions only when fixed rint reduction is selected
on fax parameter no. 24.
100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
27 POLLED FILE SAVE 1 Invalid Selecting whether or not the machine retains the polled
document in memory even after the document is polled once.
2 Valid
document in memory even after the document is olled once.
28 STAMP AT MEM. XMT 1 Invalid Selecting whether or not the machine stamps the original
documents when storing the documents into memory.
2 Valid
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel.)
30 DRD SERVICE 1 Invalid Selecting whether or not the machine is available ”DRD
Service”. If this parameter is set to ”Valid”, your machine detects
h ifi d i l i d
2 Valid
, y
the specified ring pattern only to receive a document
automatically.
31 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether or not the machine retains the document in
memory if the document is not successfully transmitted.
SAVE
2 Valid
memory if the document is not successfully transmitted.
32 COPY REDUCTION 1 Invalid Selecting whether or not the machine performs copy reduction in
accordance with the setting of Parameter No. 24 and 25.
2 Valid
accordance with the setting of Parameter No. 24 and 25.
33 XMT REDUCTION 1 Invalid Selecting whether or not the machine performs reduction when
thetransmitting document is wider than the recording paper used
2 Valid
the transmitting document is wider than the recording a er used
at the receiving machine. (UF-770 only)
34 POWER SAVE TIMER
-- Start-Time
To reduce the power consumption of the machine in standby,
select the time period to turn off the high temperature fuser unit
when the printer is idle.
-- End-Time
when the printer is idle.
Factory default is always ”ON” (When Start = 00:00 and End =
00:00).
Continued on the next page.
03002000001
03002080001
#@multitude
03002080060
03002080019
03002080020
03002080081
03002080022
03002080023
03002080024
03002080085
03002080049
03002080026
03002080027
03002080086
03002080087
03002990001
#@multitude