ProForm PFBE1816.0 - Manual (Page 12)

12
ADJUSTING THE WEIGHT RESTS AND THE
SAFETY SPOTTERS
To adjust the position of the Weight Rests (12),
remove the Upright Pins (31) from the Left and Right
Uprights (4, 5). Raise or lower the Weight Rests to
the desired position. Reengage the Upright Pins into
the Weight Rests and the Left and Right Uprights.
Make sure that the Weight Rests are at the same
height.
Repeat this action to adjust the Safety Spotters
(11). Note: You can turn the Safety Spotters 180
degrees for use with squat exercises.
5
4
31
31
12
12
31
11
9
25
8
REMOVING THE CURL FRAME
To remove the Curl Frame (9), remove the Curl Pin
(25) from the Leg Developer (8).