Polaris Trail RMK - Manual (Page 93)

90
MAINTENANCE
Clutch System
n
Drive Belt Condition
Periodically check the condition and tension of the drive belt, and
always carry a spare. Inspect the belt for signs of excessive wear: frayed
edges, missing cogs, cracks and excessive looseness. Replace the belt if
any of these conditions exist.
The following procedures apply to TEAM driven clutches.
Drive Belt Removal
1. Be sure the key switch is off and
the engine has come to a com-
plete stop. Apply the brake (or
lock the parking brake if
equipped).
2. Open the hood, remove the clutch
guard retaining pin and open the
clutch guard.
3. Locate the L-wrench in the tool
kit and install it into the open
threaded hole in the outer sheave
of the clutch. Rotate the wrench
until the sheaves open far enough
to remove the belt.
4. Firmly grasp the belt midway between the clutches and pull upward
and rearward to remove. See illustration.