Panasonic AW-E300 - Manual (Page 16)

–
+
MENU
ITEM/AWC
YES/ABC
NO/BAR
OPTION CARD VIDEO OUT
I/F REMOTE
G/L IN
IRIS
DC12V IN
GEN-LOCK GEN-LOCK IN AUX AUX IN
AUTO AUTO 75 75 ¶ /Hi-Z /Hi-Z AUTO AUTO 75 ¶ /Hi-Z /Hi-Z
R/PR /C R/PR /C
OUT OUT OUT OUT AUDIO AUDIO
SEE MANUAL SEE MANUAL
VIDEO 1 VIDEO 1
G/Y/Y G/Y/Y VIDEO 2 VIDEO 2
B/PB /B B/PB /B SYNC SYNC
S-VIDEO S-VIDEO
1 4 2 3 TALLY TALLY
CAMERA (MULTI) CAMERA (MULTI)
CABLE SELECT CABLE SELECT FUSE FUSE 250V 1.25A 250V 1.25A
TALK TALK INCOM INCOM
RECEIVE RECEIVE CONTROL CONTROL
TALLY & INCOM TALLY & INCOM
MULTI OVP OVP
MPX MPX
MPX MPX
OUTPUT OUTPUT
-14-
Caution:
The connection and installation should be done by qualified service personnel or system installers.
Refer any servicing to qualified service personnel.
Connection to the RCU (WV-RC700A,WV-RC550) is
made through the optional RCU cable AW-CA50A26.
1. Turn RCU power off before connecting cables.
2. Set the cable selection switch of the RCU to MULTI
(in case of using the WV-RC700A)
3. Connect the 50-pin connector of the RCU cable to
the I/F REMOTE Connector of the camera.
4. Turn RCU power on and the power indicator lamp
will light. The camera can now be remote con-
trolled by the RCU.
Notes:
• The maximum extension distance between the
camera and WV-RC700A is 300 m. The maximum
extension distance between the camera and WV-
RC500 is 100 m.
• Use the following options for cable extension.
Studio Cable WV-CA26U15 (15 m/50 ft)
WV-CA26U30 (30 m/100 ft)
WV-CA26U100 (100 m/330 ft)
Cable Joint Adaptor
WV-CA26T26
■ CONNECTION OF A REMOTE CONTROL UNIT (RCU)
Set to MULTI
WV-RC700A
RCU Cable
AW-CA50A26 (15 m)
CONNECTIONS