Panasonic AW-E300 - Manual (Page 43)

Synchro-scan
-
99.68 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz
Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
#4 CCD Read Out Mode Setting [Field/Frame:
FIELD/FRAME 1/FRAME2]
FIELD:
CCD storage will be by field storage.
FRAME 1: Vertical resolution increases in frame
storage.
FRAME 2: Vertical resolution is raised without
increasing residual images by frame storage
and 1/60-second shutter speed.
#5 Gain Up Setting [Gain: AGC HIGH/AGC LOW/
0 dB - 30 dB/NIGHT EYE]
AGC LOW:
The Auto Gain Up control with a maxi-
mum gain increase of about 18 dB adjusts the
luminance automatically.
AGC HIGH: The Auto Gain Up control with a maxi-
mum gain increase of about 30 dB operates. If
the luminance is still insufficient, the Night Eye
(digital gain up) also adjusts the luminance
automatically.
0 dB: 0 dB should be selected in normal cases.
1 dB - 30 dB: Use this range if sufficient video out-
put cannot be obtained even when the lens iris
is opened in shooting dark scenes.
Night Eye: Sensitivity is increased by adding the
digital gain up to 30 dB.
P O W E R
O P E R AT E
B A R
C A M
M O D E
G A I N A W C
SCENE
FILE
A B C
A T W
A
B
AUTO/AIW
E L C
L O W
M I D
M A N U
O N S C H
O F F
H I G H A G C
O F F
1 / 1 0 0
S H U T T E R
O N
O F F
1 . 2 . 3 . 4 .
G / L P H A S E
T. P E D C A B L E C O M P
9 0 ° 1 8 0 °
0 ° 2 7 0 °
Y C
Notes
• Only 0 dB, 9 dB, or 18 dB, AGC LOW, AGC HIGH
can be selected in case of using the RCU (RCB).
If the lens iris switch is at MANUAL, when operat-
ing the camera alone or when the iris switch on the
RCU (RCB, Hyblid control panel) is at AUTO, AGC
may not function.
• AGC HIGH when the AGC selection switch on the
hybrid control panel is at AGC.
• 0 dB when the manual gain switch on the hyblid
control panel is at LOW, 9 dB when it is at MID, or
18 dB when it is at HIGH.
Hybrid Control Panel
AGC Manual GAIN