Panasonic AW-E300 - Manual (Page 34)

R B
R B PED
TOTAL
PED A
B
ATW
AWC
AUTO
HOLD
ABC
IRIS
MAN
AUTO
1000 S/S ELC
500 100
OFF
SHUTTER SCENE
2 1
3
USER
SET
AUTO/ATW PAINTING
GAIN
-32-
■ Setting and Changing of the
Settins (Halogen Mode, Fluores-
cent Mode, Outdoor Mode)
q Video Level Adjustment
[Picture Level: –50 - +50]
Convergence level of AUTO IRIS/AUTO GAIN UP/
AUTO ND (ELC) can be adjusted.
w Detecting Ratio Adjustment [Light PEAK/AVG:
P50 - A50]
The ratio of AUTO IRIS/AUTO GAIN UP/AUTO ND
(ELC) detected peak to average can be adjusted
within a predetermined range.
e Photometric Measurement Method Setting [Light
Area: ALL, CENTER, TOP CUT, BOTTOM CUT,
R/L CUT
A photometric measurement method can be select-
ed for AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC).
ALL: All the screen area is measured.
CENTER: The screen is measured mainly in the
center area, about one-third of both the top and
bottom and one-third of both the right and left
portions of the screen are excluded from mea-
surement.
TOP CUT: About one-third of the top part of the
screen is excluded from measurement.
BOTTOM CUT: About one-third of the bottom por-
tion of the screen is excluded from measure-
ment.
r Auto ND (ELC) Setting [Auto ND (ELC): ON/OFF]
ON:
The electronic shutter is controlled to automati-
cally adjust the luminance.
OFF: Luminance is not automatically adjusted by
the electronic shutter.
ALL CENTER TOP CUT BOTTOM CUT R/L CUT
• ON is automatically selected when the electron-
ic shutter @2 on the submenu [Other Set] is set
to [Auto ND]. OFF is selected when other than
[Auto ND] is selected.
• ON is selected when the SHUTTER switch is set
to [ELC] in RCU (RCB) mode, and OFF is select-
ed when it is set to other than [ELC].
Notes
SHUTTER
RCU (RCB)
R/L CUT: About one-third of both the right and left
portions of the screen are excluded from mea-
surement.