Panasonic AW-E300 - Manual (Page 45)

-43-
R B
R B PED
TOTAL
PED A
B
ATW
AWC
AUTO
HOLD
ABC
IRIS
MAN
AUTO
1000 S/S
ELC
500 100
OFF
SHUTTER SCENE
2 1
3
USER
SET
AUTO/ATW PAINTING
GAIN
R/B Gain
Control
RCU (RCB)
R/B Pedestal
Control
$1 Color Bar Setup Setting [Color Bar Set: 0.0IRE/
7.5IRE]
The setup level of color bar can be adjusted.
$2 Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$3 Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can be
made when a genlock signal is supplied.
$4 Subcarrier Phase Fine Adjustment [SC Fine:
–511 - +511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
$5 Detail Level Setting [Detail: OFF/LOW/HIGH]
Contour correction quantity can be selected.
Detail settings made using the Horizontal/Vertical
Detail Level HIGH/LOW Setting
$6.
$6 Horizontal/Vertical Detail Level HIGH/LOW
Setting
[H Detail Level H: +1 - +63]
[V Detail Level H: +1 - +31]
[H Detail Level L: 0 - +62]
[V Detail Level L: 0 - +30]
Detail level can be set in horizontal (H) and vertical
(V) directions with the Detail Level Setting
$5 at
HIGH or LOW.
Whichever the direction, H or V, the set level at
HIGH must be at least one position higher than that
at LOW.
$7 Detail Band Setting [Detail Band: 1 - 5]
A contour correction band can be set with the
Detail Level Setting
$5 at HIGH or LOW. The higher
setting, the finer will be the detail.