Pioneer VSX-AX5i-G - Manual (Page 103)

Expert System Settings
103
En
EXPERT
7 TRIM should be selected (if it isn’t use
the  buttons to select it) and press
ENTER.
8 Use the  buttons to adjust the TRIM
and press ENTER.
TRIM will balance the volume level of each frequency in the
overall volume of that speaker.
9 EXIT should be selected (if it isn’t use
the  buttons to select it) and press
ENTER.
10The cursor automatically goes to the
next channel. Press ENTER and repeat
steps 3 – 8 to adjust all the channels.
11EXIT should be selected (if it isn’t use
the  buttons to select it) and press
ENTER.
Leave the setup by using the  buttons to select EXIT and
pressing ENTER. You can now go to DATA CHECK or leave the
ACOUSTIC CAL EQ setting by using the
 buttons to select
EXIT and pressing ENTER.
To use the DATA CHECK feature follow the steps here.
1 Use the  buttons to select DATA
CHECK. Press ENTER.
2 Select either ALL CH ADJUST or FRONT
ALIGN as the data you want to check.
Press ENTER.
3 Use the  buttons to select the
channel that you want to check. Press
ENTER.
That channel appears so you can check the setting.
4 When that channel has been checked,
use the  buttons to select the EXIT
and press ENTER.
5 Repeat step 3 and 4 to check all the
channels.
6 When all channels have been checked
select EXIT (if it's not already selected)
and press ENTER.
Leave the setup by using the  buttons to select EXIT and
pressing ENTER. You can now go to another ACOUSTIC CAL
EQ setting by using the
 buttons and pressing ENTER.
1
2
3
4
7
9
VSX-AX5i.book Page 103 Friday, May 23, 2003 6:33 PM