Pioneer VSX-AX5i-G - Manual (Page 24)

Connecting Your Equipment
24
En
Connecting the Radio Antennas
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
outlet.
Connect the supplied FM wire antenna and the AM loop antenna to the ANTENNA terminals as shown below.
These antennas should provide adequate reception quality in most cases, but connecting outdoor antennas
should noticeably improve sound quality.
Using outdoor antennas
S400
S400
(AUDIO)
(Single)
 AM loop antenna
1 Assemble the antenna. 2 Twist exposed wire strands
together and insert. 3 Attach to a wall, etc. (if
desired) and face toward
the direction providing
the best reception.
AM loop
antenna
FM wire
antenna
5-6 m
 To improve AM reception
Connect a 5 – 6 meter length of vinyl-coated wire to the AM
LOOP ANTENNA terminal in addition to the supplied AM loop
antenna.
For best possible reception, suspend horizontally outdoors.
 To improve FM reception
Connect an external FM antenna.
PAL connector
Indoor antenna
(vinyl-coated wire)
AM loop antenna AM loop antenna AM loop antenna AM loop antenna
75
Ω
coaxial
cable
Outdoor antenna
VSX-AX5i.book Page 24 Friday, May 23, 2003 6:33 PM