Pioneer VSX-AX5i-G - Manual (Page 118)

Techno Tidbits and Problem-solving
118
En
Specifications (multi-voltage model)
Video Section (Composite)
Input (Sensitivity/Impedance)
LINE....................................................................1 Vp-p/75 Ω
Output (Level/Impedance)
LINE....................................................................1 Vp-p/75
Ω
Frequency Response
LINE................................................... 5 Hz to 10 MHz +
–
0
3
dB
Signal-to-Noise Ratio ......................................................65 dB
FM Tuner Section
Frequency Range...................................87.5 MHz to 108 MHz
Usable Sensitivity ............. Mono: 13.2 dBf, IHF (1.3 µV/75
Ω
)
50 dB Quieting Sensitivity .............................. Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio ....................... Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion ................................................Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ........................ 60 dB (400 kHz)
Stereo Separation............................................... 40 dB (1 kHz)
Frequency Response....................... 30 Hz to 15 kHz (± 1 dB)
Antenna Input.............................................. 75
Ω
unbalanced
AM Tuner Section
Frequency Range...............531 kHz to 1,602 kHz (9 kHz step)
530 kHz to 1,700 kHz (10 kHz step)
Sensitivity (IHF, Loop antenna).................................350 µV/m
Selectivity .........................................................................25 dB
Signal-to-Noise Ratio ......................................................50 dB
Antenna.............................................................. Loop antenna
Miscellaneous
Power Requirements
...............................AC 110/120–127/220/230–240 V, 50/60 Hz
Power Consumption ...................................................... 600 W
Power Consumption in Standby mode.......................... 0.9 W
Dimensions........................420 (W) × 188 (H) × 464 (D) mm
Weight (without package) ............................................19.9 kg
Furnished Parts
FM wire Antenna .....................................................................1
AM loop Antenna ....................................................................1
“AA” IEC LR6 batteries ............................................................4
Remote Control Unit ...............................................................1
Microphone for Auto Surround Sound Setup ......................1
Microphone Stand for Auto Surround Sound Setup ...........1
AC Power Cord ........................................................................2
Operating Instructions............................................................1
Flat-bladed converter plug......................................................1
Antenna Adaptor.....................................................................1
NOTE:
Specifications and the design are subject to possible modi-
fications without notice, due to improvements.
Maximum Output Power ................................ 130 W/channel
(1 kHz, THD 10.0 %, 8
Ω)
Continuous Power Output (DIN)
Front ................ 100 W + 100 W (DIN 1 kHz, THD 1%, 8
Ω
)
Center ............................. 100 W (DIN 1 kHz, THD 1%, 8
Ω
)
Surround......... 100 W + 100 W (DIN 1 kHz, THD 1%, 8
Ω
)
Surround Back
.................. 100 W + 100 W (DIN 1 kHz, THD 1%, 8
Ω
)
Rated Power Output ...................................... 100 W + 100 W
(20 Hz – 20 kHz, 0.09 %, 8
Ω)
Audio Section
Input (Sensitivity/Impedance)
PHONO MM ................................................... 4.7 mV/47 k Ω
LINE................................................................ 335 mV/47 k
Ω
Frequency Response
PHONO MM ...........................20 Hz to 20,000 Hz ± 0.3 dB
LINE..............................................5 Hz to 100,000 Hz +
–
0
3
dB
Output (Level/Impedance)
LINE............................................................... 335 mV/2.2 k
Ω
Tone Control
BASS........................................................... ± 6 dB (100 Hz)
TREBLE ....................................................... ± 6 dB (10 kHz)
LOUDNESS................................+4/+2 dB (100Hz/10 kHz)
(at volume position -40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE............................................................................ 101 dB
Signal-to-Noise Ratio
[DIN (Continuous rated power output/50 mW)]
LINE......................................................................... 92/65 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE.............................................................................. 83 dB
* Measured pursuant to the Federal Trade Commission’s
Trade Regulation rule on Power Output Claims for
Amplifiers.
** Measured by Audio Spectrum Analyzer.
Video Section (S jack)
Input (Sensitivity/Impedance) .............................. 1 Vp-p/75
Ω
Output (Level/Impedance).................................... 1 Vp-p/75
Ω
Frequency Response ........................... 5 Hz to 10 MHz +
–
0
3
dB
Signal-to-Noise Ratio ...................................................... 65 dB
Video Section (Component)
Input (Sensitivity) ................................................. 1 Vp-p/75
Ω
Output (Level/Impedance).................................... 1 Vp-p/75 Ω
Frequency Response ........................... 5 Hz to 40 MHz
+
–
0
3
dB
Signal-to-Noise Ratio ...................................................... 65 dB
VSX-AX5i.book Page 118 Friday, May 23, 2003 6:33 PM