Pioneer VSX-AX5i-G - Manual (Page 37)

Displays and Controls
37
En
PREPARATION
S400
S400
(AUDIO)
(Single) (Single)
8 COMPONENT VIDEO MONITOR OUT ter-
minals
Use these terminals to output the video signal
from the COMPONENT VIDEO IN terminals to
your TV. See page 16 for more information.
9 SPEAKERS terminals (see page 25)
Use these terminals to connect speakers to the
receiver. The FRONT, CENTER and SURROUND
terminals are for the main speaker system and
the SURROUND BACK speakers can be set to
either the main system, the SECOND ZONE, or
the FRONT BI-AMP. See page 39 to set the
SURROUND BACK speakers.
10 TWO VOLTAGE SELECTORS switches
(multi-voltage model only)
Use to match the voltage coming into the
receiver with the voltage in your country or
region (see page 3).
11 AC IN
Hook up the power cord to this terminal.
12 AC OUTLET (European model only)
(switched, 100 W max)
Hook up an external component to the power
supply of this receiver. Only do this with audio or
video components being used in this system
and never hook up heavy equipment (like TVs,
heaters, air conditioners, refrigerators, etc.) to
this receiver.
13 USB AUDIO terminal
Use this terminal to connect a PC to this receiver
(see page 77).
14 Audio input/output terminals (connect
analog components here, see page 20)
Use these terminals to input/output the audio
signal from analog components (like a cassette
deck or turntable). These are analog jacks.
15 Video components input/output termi-
nals
Input/output signals from your video
components (DVD, VCR, TV tuners, SAT tuners,
etc.) here. (see page 17).
16 MULTI CH IN terminals (see page 21)
Use these terminals to input a multichannel
surround signal (for example, a DVD-Audio
signal) in an analog fashion. These are analog
jacks.
17 COMPONENT VIDEO IN terminals
Use these terminals to hook up the video
connections of your video components with this
high quality method. Your components will have
to have the terminals as well to take advantage of
this kind of connection. If you don't connect as
per the default settings (see page 16) you need to
complete “Assigning the Component Video
Inputs” on page 90.
(multi-voltage
model only) (European
model only)
VSX-AX5i.book Page 37 Friday, May 23, 2003 6:33 PM